You can set the processing parameter by pressing <
<
> dial while looking at the LCD panel. (C.Fn-12-3→126)
Select the parameter to be set.
4
●
Turn the <
> dial to select the parameter,
then press <
●
The parameter selection will change in the
following loop:
[Contrast]
[Sharpness]
[Saturation]
[Color tone]
Set the desired parameter setting.
5
●
Turn the <
> dial and select [–], [0], or [+].
Then press <
Go back to step 1.
6
●
Press the <MENU> button twice to return to
step 1, then press <
Select the desired set number.
7
●
Turn the <
> dial and select [Set 1], [Set
2], or [Set 3]. Then press <
Setting Processing Parameters
>.
> .
>.
>.
> and turning the <
> or
3
53