Automated Playback Of Recorded Images (Auto Playback) - Canon EOS D60 Instructions Manual

Automated Playback of Recorded Images (Auto playback)

This function automatically and continuously displays all images recorded on the CF card.
Each image is displayed for approximately 3 seconds.
●
During auto playback, the Auto power off function (→29, 120) does not operate.
After you have finished viewing, be sure to press the <MENU> button to stop the
auto playback.
●
Display time may vary depending on the image.
While auto playback is paused, you can turn the <
in the same way as for single-image display (→98).
1 From the menu, select [Auto
playback].
●
Press the < MENU> button.
●
Turn the < > dial to select [Auto play-
back].
Start auto playback.
2
●
Press the <
➡
The camera loads the images, and after the
"Loading image..." screen has been
displayed for approximately 2 seconds, the
auto playback starts.
●
To pause auto playback, press the <
button. During the pause, the [ ] indicator
appears in the upper left part of the image.
To resume, press the <
●
To quit auto playback, press the <MENU>
button.
> dial to change the picture
Viewing Recorded Images
> button.
> button again.
>
5
101