Brother P-Touch 9500pc Quick Reference page 52

4 Double-click the P-touch Editor 3.2
Installer icon.
→ The Installer starts.
Confirm the drive to install the software
5
to, and then click [Custom Install].
To change the drive, click [Drive].
→ The dialog box to select the
programs to install appears.
Clear the check boxes for all of the
6
options except for PT-9500PC Driver.
7 Click [Install].
→ Installation begins.
→ When installation is complete, the
message "Installation is done."
appears.
8 Click [Quit].
Click [Restart].
9
→ Installation of the printer driver is
complete, and the Macintosh will
restart.
After the Macintosh restarts, connect the
0
PT-9500PC to the Macintosh with the
USB interface cable, and then turn on the
PT-9500PC.
For details, refer to "Connecting to a
personal computer" ( → P.16).
51