Brother P-Touch 9500pc Quick Reference page 37

Click the button for Driver.
4
→ The Driver Setup dialog box appears.
Select "USB cable", and then click [OK].
5
→ The Confirmation dialog box
appears.
Follow the instructions on each dialog
6
box and start installation.
c
Refer to steps
basic setup" ( → P.29).
→ The Driver Setup (Brother
PT-9500PC) dialog box appears.
36
h
- in "Installing using
Select "Yes, restart immediately", and
7
then click [Finish].
→ Installation of the printer driver is
complete, and the personal
computer will restart.
■ Connecting to a serial port
Note
●
When installing the PT-9500PC to the
serial port of a personal computer
running Windows
2000 Pro/XP, install the printer driver
according to following steps.
Start the personal computer, and then insert
1
the CD-ROM into the CD-ROM drive.
→ The Brother Setup dialog box appears.
• It may take a short time until the
Brother Setup dialog box appears.
• If the Brother Setup dialog box does not
appear, double-click the My Computer icon,
and then double-click the P-touch icon.
Select the desired language, and then
2
click [OK].
Click the button for Advanced setup.
3
→ The dialog box to select the software
to install appears.
®
98/98 SE/Me/