Brother P-Touch 9500pc Quick Reference page 38

Click the button for Driver.
4
→ The Driver Setup dialog box appears.
Select "Serial cable", and then click
5
[OK].
→ The Driver Setup (Brother
PT-9500PC) dialog box to indicate
setup will begin appears.
Select "Install", and then click [Next].
6
→ The dialog box to select the port that
the PT-9500PC will be to connected
to appears.
Select the port that the PT-9500PC will
7
be connected to, and then click [Next].
→ The dialog box to confirm the
installation information appears.
Confirm that the driver and port are
8
correct, and then click [Next].
To correct the installation information,
click [Back].
→ Installation begins.
37