Selecting The Drive Mode - Canon MVX3 Instruction Manual

Selecting the Drive Mode

You can choose between three drive modes (recording modes).
E
Continuous
AEB (Auto Exposure Bracketing) Captures a still image in three different exposures
Single
Continuous Shooting
You can capture a quick series of still images with the continuous shooting function.
CAMERA
CAMERA SET UP
( 42)
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [CONT.
" " appears on the screen.
3. Press and hold the PHOTO button to record the still images.
A series of still images will be recorded.
4. Release the PHOTO button to end recording.
❍ Maximum number of continuous shots at one time:
Still Image Size
1632 × 1224
1280 × 960
640 × 480
* These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
❍ This function can be assigned to the CSTM KEY (
❍ The range of the flash decreases in continuous shooting mode. We
recommend recording close to the subject when using the flash.
118
Captures a quick series of still images while you press
the PHOTO button.
just by pressing the PHOTO button once.
Records a single still image when you press the
PHOTO button.
PLAY (VCR)
DRIVE MODE•••SINGLE
] and close the menu.
Built-in flash
Flash OFF/ON
Flash OFF
Flash ON
Flash OFF
Flash ON
CARD CAMERA
Frames per
Maximum Number
Second
of Continuous Shots
2 frames
3 frames
2 frames
3 frames
2 frames
52).
CARD PLAY (VCR)
10 images
10 images
10 images
30 images
30 images