Selecting The Drive Mode - Canon MVX4 Instruction Manual

Selecting the Drive Mode

(Single)
(Continuous Shooting)
(High-Speed Continuous
Shooting)
(AEB (Auto Exposure
Bracketing))
DRIVE MODE button
1. Set the camcorder to CAMERA•
2. Set the mode dial to a mode other than
3. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
4. Press the PHOTO button halfway.
5. Continuous Shooting/High-Speed Continuous Shooting: Press and
hold the PHOTO button fully.
A series of still images will be recorded as long as you hold the PHOTO button.
Auto Exposure Bracketing: Press the PHOTO button fully.
Three still images in different exposures are recorded to the memory card.
Records a single still image when you press the PHOTO
button.
Captures a quick series of still images while you press the
PHOTO button. For the number of frames per second,
refer to the table on the next page.
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing
you to choose the perfect exposed shot.
mode.
PHOTO button
Mode dial
.
E
87