Using A Household Power Source - Canon MVX3 Instruction Manual

Using a Household Power Source

You can operate the camcorder from a household power source using the supplied
power adapter. The power adapter converts current from a power outlet (100-240 V
AC, 50/60 Hz) to the DC current used by the camcorder.
1. Turn the POWER switch to OFF.
2. Connect the power cord to the
power adapter.
3. Plug the power cord into a power
outlet.
4. Connect the power adapter to the
camcorder's DC IN terminal.
5. After use, turn off the camcorder and
disconnect the power adapter from
the camcorder. Unplug the power
cord from the power outlet and
disconnect it from the adapter.
❍ Turn off the camcorder before connecting or disconnecting the power adapter.
❍ If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the aerial cable.
❍ Do not connect any products that are not expressly recommended to the
camcorder's DC IN terminal or to the power adapter.
❍ You may hear some noise from the power adapter during use. This is not a
malfunction.
Attaching the Lens Hood
Attach the enclosed ferrite core before you connect the CA-570 Compact Power
Adapter to the camcorder.
Attach the ferrite core to the cable
about 5 cm from the plug end (the plug
to be connected to the camcorder) of
the CA-570 Compact Power Adapter.
Pass the cable through the centre of the core
and wrap it around the core twice, then close the unit until it clicks shut.
q
w
e
E
r
13