Playback; Playing Back Movies - Canon MD120 Instruction Manual

Playback

Playback

Playing Back Movies

Play back the tape on the LCD display or
close the LCD panel to use the
viewfinder. You can also turn the LCD
panel and close it with the screen facing
out.
1
Holding the lock button pressed
down, set the
PLAY.
2
If the joystick guide does not
appear on screen, press (
display it.
3
Locate the point where you want to
begin the playback.
Push the joystick (
rewind the tape or (
to fast forward.
4
Push the joystick (
to begin the playback.
( 7)
switch to
) to
) towards to
) towards
) towards /
D
URING PLAYBACK
5
Push the joystick (
/ again to pause the playback.
6
Push the joystick (
stop the playback.
T
O ADJUST THE VOLUME
1 FUNC.
Press .
2
Select ( ) [
VOLUME] and adjust (
volume.
• The sound from the built-in speaker
will be muted when you close the LCD
panel or while the STV-250N Stereo
Video Cable is connected to the AV
terminal.
• If you turn off the volume completely,
the icon will change to
3 FUNC.
Press to close the menu.
S P M
PECIAL LAYBACK ODES
There is no sound during the special
playback modes.
Fast Playback: Push the joystick (
towards or (
the joystick pressed down to rewind/fast
forward the tape while continuing the
playback.
NOTES
You can display the date and time of the
recording ( 37).
During some special playback modes, you
may notice some video problems (blocky video
artifacts, banding, etc.) in the playback picture.
To protect the tape and video heads, the
camcorder will enter the stop mode (
playback pause (
seconds. To resume the playback push the
joystick ( ) towards
Playback 23
) towards
) towards to
SPEAKER
) the
.
)
) towards . Hold
) if left in
) mode for 4 minutes 30
/ .