Display Setup (Lcd Brightness, Language, Etc.) - Canon MD120 Instruction Manual

28 Menu Options Lists

Display Setup (LCD Brightness, Language, etc.)

DISPLAY SETUP
BRIGHTNESS
Adjust ( ) the brightness of the LCD
display with the joystick.
Changing the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
BACKLIGHT
[ NORMAL]*, [
* The default setting is [
when you power the camcorder using the
compact power adapter.
TV SCREEN
[ ON], [ OFF]
[ ON], [ OFF]
When set to [ ON], the camcorder's
on-screen displays will appear also on the
screen of a connected TV or monitor.
When the date and time are displayed on
the camcorder's screen they will also
appear on a connected TV regardless of
the [TV SCREEN] setting. Turn off the
date/time display with the [DATA CODE]
setting ( 29).
( 17)
BRIGHT]
BRIGHT]
MARKERS
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [
[ GRID(GRY)]
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Using the markers will not affect the
recordings on the tape.
DISPLAYS
[ ON], [ OFF<PLAYBK>]
You can hide the on-screen displays to
show only the playback picture on the full
screen.
Tape operation displays appear for 2
seconds.
Warning messages and the data code
(if activated) will appear, even when set to
[ OFF<PLAYBK>].
All on-screen displays will appear while
the playback image is magnified or a
digital effect is activated.
6SEC.DATE
[ ON], [ OFF]
When you start playing back a tape or
when the date of the recording changes,
the date and time will be displayed for 6
seconds.
GRID(WHT)],