Recording; Recording Movies - Canon MD120 Instruction Manual

Basic Functions

Recording

Recording

Recording Movies

Before You Begin Recording
Make a test recording first to check if the
camcorder operates correctly. If
necessary, clean the video heads (
1
Move the lens cover switch down to
to open the lens cover.
2
Holding the lock button pressed
down, set the
CAMERA.
Start/Stop
3
Press
Start/Stop
Press again to pause the
recording.
2).
( 7)
switch to
to begin recording.
T
O REVIEW THE LAST SCENE RECORDED
1
Set the mode switch to
2
If the joystick guide does not appear
on screen, press (
3
Push the joystick (
towards and release it.
• The camcorder will play back a few
seconds of the last recording made
and return to record pause mode.
• You can also hold the joystick
pressed ( ) towards
towards to play back the tape
(reverse or forward respectively) to
locate the point where you want to start
recording.
W
HEN YOU HAVE FINISHED RECORDING
1
Close the lens cover and the LCD
panel.
2
Turn off the camcorder.
3
Remove the tape.
4
Disconnect the power source and
remove the battery pack.
NOTES
About the recording time: By changing the
recording mode you can change the video
Recording 21
EXP
FOCUS
.
) to display it.
) momentarily
or ( )