Tilt Lever - Suzuki DF150AP Owner's Manual

 CAUTION
The motor is very heavy. When you tilt it
manually, you could injure your back or
slip and fall causing injury.
When you tilt the motor manually, ensure
that your grip and footing are secure and
that you are able to support the weight of
the engine.

TILT LEVER

The Tilt Lever is provided so you can support
the motor in a tilted position for non-moving
engine support.
To set the Tilt Lever:
1. Tilt the motor all the way up by pressing the
Power Trim and Tilt "UP" switch.
2. Pull down the Tilt Lever as shown in the illus-
tration.
3. Lower the motor by pressing the Power Trim
and Tilt "DOWN" switch, until the motor is
supported by the Tilt Lever.
4. Continue to operate the Power Trim and Tilt
"DOWN" switch until the trim rods are com-
pletely retracted.
NOTICE
If you do not retract the trim rams com-
pletely when mooring, they may become
deteriorated or corroded.
Be sure to retract the trim rams com-
pletely when mooring.
To release the Tilt Lever, tilt the motor all the
way up using the Power Trim and Tilt "UP"
switch, and pull up the Tilt Lever.
If equipped with Keyless Start System:
 CAUTION
The remote Power Trim and Tilt switch
will work when the Keyless start system
is in OFF state. If someone activates the
switch while you are moving the tilt lever,
your hand could be injured.
Keep all persons away from the remote
Power Trim and Tilt switch while you are
moving the tilt lever.
53