Suzuki DF150AP Owner's Manual page 21

NOTE:
The buzzer emits one (1) short sound for the
1st digit, two (2) short sounds for the 2nd digit,
three (3) short sounds for the 3rd digit, and four
(4) short sounds for the 4th digit.
Buzzer sound
When entering
the 1st digit
When entering
the 2nd digit
When entering
the 3rd digit
When entering
the 4th digit
NOTE:
• If a passcode is not entered during the 10
sounds, the process will start over again after
briefly turning the switch.
• If the main switch is not turned to select a
passcode number after repeating the pass-
code input operation three (3) times, the input
operation is cancelled.
In this case, the buzzer emits short beeps for
five (5) seconds to notify that the input opera-
tion has been cancelled.
• If the passcode input operation has been per-
formed multiple times, the last passcode
entered will become effective.
• To interrupt passcode input, install the lock
plate on the emergency stop switch.
Hold it for five (5) seconds.
NOTE:
When performing the passcode input operation
again after the operation has been cancelled
due to passcode input failure or after having
interrupted the operation;
1) Install the emergency switch lock plate.
2) Turn the main switch to the "
then release it to the "
3) Perform the procedure described above
from Step 5.
(5) After the buzzer has sounded once, the key-
fob LED will blink the entered passcode.
Example: In the case of passcode 1234
LED
Number of key-fob blinks
(6) Install the lock plate on the emergency stop
switch.
(7) Turn the main switch to the "
then release it to the "
Keyless Start System OFF.
After that, do not perform any operation for
at least 30 seconds, while the system per-
forms passcode update.
" position and
" position.
" position and
" position to turn the
21