Nortel DMS-100 Series Manual page 115

Procedure 11-1
Replacing Bus Terminator circuit pack (NT6M68AA) - version numbers G12 or earlier (e.g.,
D09 or E12)
Step Description
WARNING
This should not be done at a high traffic period, it may cause a loss of AMA.
42
Verify replacement circuit pack has corrected original error.
43
When all maintenance activities are complete, be sure to replace the front panel of the
DPP. Carefully line up the four captive screws of the front panel with their mounting
holes. Tighten the captive screws; but do not bear down.
The procedure is complete.
Bus terminator circuit pack (NT6M68AA) 11-5
Sheet 4 of 4
DPP Hardware Component Replacement Guide DPP001 and up