Quick Setup List - Ferris IS3100Z Series Manual

IS3100Z Series - 4 Wheel IS - 61" & 72" Mower Deck

Quick Setup List -

Page Setup Procedure
3 Uncrating
3 Connect Battery
4 Tractor Assembly
5 Roll Bar Assembly
7 Check Fluid Levels
8 Mower Assembly
15 Lubrication &
Fuel Preparation
17 SAFETY CHECKS
Steps to Perform
❏ Remove Crate & Banding.
❏ Loosen Hydraulic Release Valves.
❏ Release Parking Brake and Roll Tractor forward off skid.
❏ Tighten Hydraulic Release Valves.
❏ Connect Battery.
❏ Assemble the Motion Control Handles.
❏ Assemble the Seat.
❏ Assemble the Retainer Pins.
❏ Assemble the Top Loop.
❏ Install the Roll Bar.
❏ Check Engine Oil level.
❏ Check Hydraulic Oil level.
❏ Check Engine Coolant level.
❏ Check Tire Pressure.
❏ Check Blade Bolt Torque.
❏ Install Deck Pusher Bars.
❏ Install the Mower Deck.
❏ Check & Adjust Deck Lift Rod Timing
❏ Check & Level Mower Deck.
❏ Install & Check Deck Drive Belt.
❏ Lubricate all grease & oil points.
❏ Add Fuel.
❏ Start the Engine.
❏ Check for LOOSE HARDWARE.
❏ Check all OPERATOR CONTROLS.
❏ Perform SAFETY INTERLOCK SYSTEM CHECK.
2