Quick Setup List - Ferris 400S Series Dealer Setup & Adjustment Instructions Manual

Quick Setup List

Setup Procedures
Uncrate the unit.
Install the parking brake handle.
Connect bottom shock mount bolts.
Connect the battery cables.
Install the ground speed control levers.
Install the seat.
Check engine oil level.
Check / Fill transmission oil level.
Check tire pressures.
Check blade bolt and pulley bolt torque.
Check and level the mower deck.
Check the mower deck drive belt.
Lubricate all grease and oil points.
Check / Add fuel.
Start the engine
PERFORM THE SAFETY CHECKS
Check for LOOSE HARDWARE.
Check all OPERATOR CONTROLS.
Perform SAFETY INTERLOCK SYSTEM CHECK.
Register Product
To register the product: log onto www.thepowerportal.com, select the appropriate brand, click "Sales &
Marketing", select the "Product Registration" link, and then select "New Product Registration". Fill out and submit
the online product registration form.
Ferris is a registered trademark of Briggs & Stratton
Corporation.
2 ferrismowers.com