Table of Contents
Advertisement
Conversion to LP (Propane) Gas
!
WARNING!
is cool. Ensure the burner is turned off. Turn the gas off at source and disconnect the appliance before
beginning conversion.
WARNING!
!
WARNING!
be leak tested before operating the appliance.
Your fireplace can be easily converted to LP (Propane) Gas by following these steps:
1. Remove the glass embers from the tray.
2. Remove the glass tray from the fireplace by removing the (8) screws that hold the tray in place.
3. Carefully lift the glass tray from the fireplace and set aside. Take care not to damage or kink the
thermocouple wire.
4. Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
5. Unscrew the natural gas orifice from the inside of the burner as illustrated.
6. Replace the natural gas orifice with the LP (Propane) orifice supplied.
Note: The air shutter has been factory set closed for Natural Gas and must be adjusted to full open for
propane.
N415-0346-AU FEB 23.21
To avoid the possibility of burns conversions should only be done when the appliance
Glass embers may have sharp edges wear safety glasses and gloves when handling.
This conversion must be performed by a licensed gas fitter, and all connections must
17
www.napoleon.com
Advertisement
Table of Contents
