How To Access The Scanner; For Fax-4750E Users; For Fax-5750E Users; Prescanning An Image - Brother Model 5750e Owner's Manual

How to Access the Scanner

For FAX-4750e Users

In the application you are using, select the Brother MFL Pro TWAIN Scanner.
The method of selection will vary depending on your software application.

For FAX-5750e Users

Run your PaperPort
right corner of your screen. The first time you use the Brother TWAIN driver,
set it as the default by choosing the Select Source, and then click the PaperPort
icon. Afterward, for each original you scan, choose Acquire Image by clicking
®
the PaperPort

PreScanning an Image

PreScanning allows you to scan an image quickly at a low resolution. A
thumbnail version will appear in the Scanning Area. This is only a preview of
the image, so you can see how it will look. The PreScan button is used to
preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click Start to scan the image.
1
Insert the original face down in the ADF.
2
Click PreScan.
The entire original will be scanned into your Macintosh G3 or iMac and will
appear in the Scanning Area of the Scanner dialog box:
®
software. You will see the PaperPort
icon. The Scanner setup dialog box will appear.
H O W T O P R I N T , F A X A N D S C A N U S I N G A P P L E
®
icon in the upper
® ®
17 - 8
M A C I N T O S H
®