Printing A Fax In Memory; Memory Security; Setting Up The Password; Turning Memory Security On - Brother Model 5750e Owner's Manual

Printing a Fax in Memory

If you have Fax Storage ON for Remote Retrieval you can still print a fax in the
memory when you are at your machine. (See
1
Press Menu, 2, 5, 4.
2
Press Fax Start.
3
After printing is finished, and then press
Stop/Exit.

Memory Security

Memory Security lets you prevent unauthorized access to the machine. The
machine will not send faxes or print received faxes without the password. You
cannot continue to schedule Delayed Faxes or Polling jobs. However, any pre-
scheduled Delayed Faxes will be sent when you turn Memory Security ON so
they won't be lost.
If Fax Storage is ON before you turn Memory Security ON, then Fax
Forwarding and Remote Retrieval will continue to work.
While Memory Security is ON the following operations are available:
I Receiving faxes into memory (limited by memory capacity)
I Fax Forwarding (If Fax Storage was already ON)
I Remote Retrieval
To print the faxes in memory, turn Memory Security OFF.

Setting Up the Password

1
Press Menu, 2, 0, 4.
2
Enter a 4-digit number for the password, and then press Set.
If you are entering the password for the first time, the LCD shows VERIFY.
3
Re-enter the password, and then press Set.

Turning Memory Security ON

1
Press or
2
Enter the registered 4-digit password, and then press Set.
The machine goes OFFLINE and the LCD shows SECURE MODE.
to select SET SECURITY, and then press Set.
, Page 9-3.)
Setting Fax Storage
S E T U P R E C E I V E
5 - 6