Finding Specific Scenes - JVC HR-J695EK Instructions Manual

All manuals and user guides at all-guides.com

Finding Specific Scenes

Skip Search
During playback, press 3 up to 4 times. Each press of the 3 button will cause
the VCR to go into fast-motion playback for a period of 30 seconds. Normal playback resumes
automatically.
• To return to normal playback during a Skip Search, press ..
Index Search
Each time you record a programme, this VCR puts an index marker at the point that you started
recording. The VCR can fast wind to any one of nine index markers in either direction from the
point that you stop the tape.
NOTE:
Before starting, make sure the VCR is in the Stop mode.
finding first index marker Press D or E once. The TV screen will display [
and the VCR begins searching through the tape in the corresponding direction for the first index
marker from its current position.
finding subsequent index markers Press D or E the required number of times (e.g.
five). The TV screen will display [
corresponding direction for the fifth index marker from its current position.
Instant ReView
After ensuring that the VCR is turned off and that the timer
mode is disengaged, press r.
Pressing the rbutton causes the VCR to turn on, rewind to the beginning of the last
timer-recorded programme and begin playback. The display panel tells you how many timer-
recorded programmes are on the tape. If you have three, the REVIEW indicator and '
the display panel. To watch the first of these three programmes, press rthree times.
You can move back up to nine programmes from your current position.
timer mode Instant ReView will not work while the VCR is in Timer mode.
auto satellite programme recording If
to record the programmes, the number of recorded programmes will not be displayed on the
display panel.
or ] and the VCR begins searching through the tape in the
5 5
Auto Satellite Programme Recording
advanced features
or ]
1
SAT
VCR
REVIEW
' blink on
3
has been used
31
1