Sound Modes - JVC HR-J695EK Instructions Manual

30 advanced features
before you start
Set On Screen Display
(O.S.D.) to ON
( pg. 41)
All manuals and user guides at all-guides.com

Sound Modes

NICAM Stereo and Bilingual Broadcasts
This VCR is equipped with a digital stereo sound decoder (
the reception of stereo and bilingual broadcasts possible. When the VCR is tuned
to a different preset, the type of broadcast will be displayed on the TV screen for
a few seconds.
select stereo Press
AUDIO
select bilingual Press
screen (as required).
select standard To listen to standard monaural audio during a NICAM
broadcast, press until
AUDIO
Soundtrack Selection
This VCR is capable of recording three soundtracks and will play back the one
that you select with the AUDIO
track use
HI FI
Hi-Fi stereo pre-recorded tapes
L l L R
HI FI
Main audio of bilingual tapes
L l
HI FI
Sub-audio of bilingual tapes
L R
Audio-dubbed tapes
NORM
HI FI
Audio-dubbed tapes
NORM
Notes
normal selection hi fi l l L r should normally be selected. In this mode,
Hi-Fi stereo tapes are played back in stereo and the normal audio track is played
back automatically for tapes which only have normal audio.
recording If the NICAM stereo signal is poor or unavailable, the VCR will
automatically record standard monoaural audio onto both the Hi-Fi and normal
audio tracks. This will eliminate possible audio interference.
until l L appears on the TV screen.
HIFI L R
until l or
AUDIO HIFI L HIFI
appears on the TV screen.
NORM
button.
) which makes
NICAM
L appears on the TV
R