Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell Inspiron 16 7610 Service Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the M.2 2230 solid-state drive
4. Remove the M.2 2230 solid-state drive
5. Remove the wireless card.
6. Remove the battery.
7. Remove the power-adapter
8. Remove the I/O board.
9. Remove the touchpad.
10. Remove the display assembly.
11. Remove the power-button
12. Remove the power button
13. Remove the left fan.
14. Remove the right fan.
15. Remove the system board.
NOTE: The system board can be removed with the heat sink, solid-state drives, and memory installed.
16. Remove the speakers.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the pre-requisites you are left with the palm-rest and keyboard assembly.
58 Removing and installing components
Before working inside your
or M.2 2280 solid-state drive
from M.2 slot two.
port.
board.
or power button with fingerprint, whichever applicable.
computer.
from M.2 slot one, whichever applicable