8695 5522 / G
D - MAINTENANCE
1 - SERVICING
So that the machine continues to provide good service for as long as possible, a certain minimum of care and
maintenance is necessary
The frequency of this maintenance work is given on the basis of the production of one work station per day.
Maintenance should be more frequent if production is greater.
Your maintenance department may photocopy these pages so that it can follow up maintenance dates and
- Check if the air filters are dirty, clean them or change them.
NOTE: use a vacuum nozzle to clean the power source
NERTAMATIC 450 AC/DC
operations (tick as appropriate)
every 40 hours
NERTAMATIC 450 AC/DC POWER SOURCE
-11