Trane LWHA Installation Operation & Maintenance page 2

TRANE ®
General Information
Foreword
These instructions do not attempt to
cover all variations in systems, nor to
provide for every possible contingency
to be met in connection with
installation. Should further information
be desired or should particular
problems arise which
sufficiently covered for the purchaser's
purpose, the matter should be referred
to the manufacturer.
Warranty
Warranty is based on the general terms
and conditions of The Trane Company.
The warranty is void if the equipment
is repaired or modified without the
written approval of the manufacturer, if
the operating limits are exceeded or if
the control system or the electrical
wiring is modified. Damage due to
misuse, lack of maintenance or failure
to comply with the manufacturer's
instructions or recommendations are
not covered by the warranty obligation.
Reception
On arrival, inspect the unit before
signing the delivery note. Specify any
damage on the delivery note, and send
a registered letter of protest to the last
carrier of the goods within 72 hours of
delivery. Notify the local Trane Sales
Office at the same time.
The unit should be totally inspected
within 15 days of delivery. If any
concealed damage is discovered,
stop unpacking the shipment.
Notify the carrier immediately by phone
or any registered mail. Notify the local
Trane Sales Office. Conceal damage
must be reported within 15 days of
delivery. Check the unit nameplate to
confirm that the proper unit was
shipped. Available power supply must
be compatible with
characteristics specified
component nameplates.
i
Installation
This manual covers the installation,
operation and maintenance of the
Trane Chilled Water Blower coil Air
Handlers.
designed to incorporate a single slab
coil assembly, improved application
are not flexibility, servicing and maintenance
accessibility
accessory line.
LWHAs are specially designed to meet
tight ceiling space requirement.
Note:
"Warnings" and "Cautions" appear at
appropriate places in this manual.
Your personal safety and the proper
operation of this machine require that
you follow them carefully.
manufacturer assumes no liability for
installations or servicing performed by
unqualified personnel.
Handling
The unit will be supplied with a
shipping based
packaging over the unit casing. The
packaging should be kept on the unit
during handling or storage on site.
If it is necessary to remove the
packaging for inspection prior to
completion of on site handling, retain
packaging parts and reapply them by
tapping in position to prevent damage
to the casing. The unit as supplied
has a shipping base which is suitable
for handling by a fork lift truck.
electrical
on
LWHA is completely
and an improved
The
and protective