Panasonic WJ-MS424 Operating Instructions Manual page 16

SYSTEM 3
A system consisting of this Quad Unit and the specified cameras should include the WV-PS104C Camera Drive Unit.
CAMERA
IN
Note: When pressing the ALARM RESET/QUAD/SEQ/ESC button or the VIDEO SELECT/CURSOR/SELECT buttons, the pic-
ture on the video monitor may roll briefly at the time of switching.
Connections
• Connect the VIDEO IN connectors of this unit to the video output connectors of the WV-PS104C Camera Drive Unit.
• Connect the VIDEO OUT connector of this unit to the video input connector of the monitor.
• Connect the VTR OUT connector of this unit to the video input connector of the time lapse VTR.
• Connect the video output connectors of the cameras to the camera input connectors of the WV-PS104C Camera Drive
Unit.
VIDEO
4ch 3ch 2ch
VIDEO AUDIO CAMERA VIDEO AUDIO CAMERA VIDEO
OUT OUT IN OUT OUT IN OUT
VIDEO
4 3 2 1
OUT IN OUT IN OUT IN OUT
Monitor
1ch
AUDIO CAMERA VIDEO AUDIO
OUT IN OUT OUT
VTR VIDEO ALARM/REMOTE
IN OUT OUT
VTR
-14-
WV-PS104C
CAUTION
VD/SYNC VD/SYNC
IN OUT
(4Vp-p 75Ω)
WJ-MS424
SIGNAL GND
Monitor