34. Finally, screw the protection cap locking
5.1.2 Electrochemical cleaning and regeneration center
The ORBISPHERE 32301 is a very efficient cleaning and regeneration tool for electrochemical
sensors. This tool reverses the electrochemical process that is taking place in the sensor cell
during normal operation. This removes oxidation and at the same time regenerates the surface
of the electrodes. In addition, the regeneration center offers a continuity tester for checking the
sensor electronics.
Use of this tool is recommended for a noticeably extended sensor life. Detailed information on
how to use the cleaning and regeneration center is included in the 32301 Operator Manual.
washer back into place in a clockwise
motion, and tighten finger tight.
Figure 12 Model 32301 cleaning and regeneration center
Maintenance and Troubleshooting
31