Hach LANGE ORBISPHERE C1100 User Manual page 20

Installation
14. Gently screw the sensor clockwise into the
15. Continue turning until the cartridge is
16. The empty container, the screw top and
Note: It is normal that some of the electrolyte will
overflow from the replacement cartridge and into the
plastic container.
17. Rinse the sensor under a tap for about 5
18. Drain the overflow electrolyte from the
19. Discard the used container.
18
replacement cartridge, applying minimum
pressure to avoid any damage to the screw
threads.
attached to the sensor, and the sensor is
automatically released from the container.
packing component can be discarded.
seconds to remove any excess electrolyte,
then gently wipe with a soft tissue to ensure
all parts are completely dry.
container into a sink and flush away.