Resynchronization - VTech ErisTerminal VSP610A Administrator And Provisioning Manual

Using the WebUI
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Setting
Vendor Class ID (DHCP
60)
User Class Info (DHCP
77)

Resynchronization

Setting
Mode
Bootup Check
Schedule Check: Disable
Schedule Check: Interval
Schedule Check: 
Days of the Week
VSP610A Administrator and Provisioning Manual
Description
DHCP Option 60 is available to send vendor-specific
information to the DHCP Server.
DHCP Option 77 is available to send vendor-specific
information to the DHCP Server.
Description
Sets which files for which the VSP610A checks. It can
check for configuration files, firmware update files (from the
URL entered on the Firmware Server Settings page), or
both.
Note: When checking for both configuration and firmware
files, the firmware URL can be within the config file. This
firmware URL takes take precedence over the URL on the
Firmware Server Settings page. It will also update the URL
on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Sets the VSP610A to check the provisioning URL for new
configuration and/or firmware files upon bootup. The
update is applied as part of the reboot process.
When selected, disables regularly scheduled file checking.
Sets an interval for checking for updates. After selecting
Interval, enter the interval in minutes between update checks.
Select to enable weekly checking for updates on one or
more days. After selecting Days of the Week, select the
day(s) on which the VSP610A checks for updates.
79
Back to Contents