Network Menu - Wired Lan Menu - Epson EV-110 User Manual

Projector Network Settings - Network Menu
Setting Options
Password
Client Certificate
Verify Server Cert.
CA certificate
RADIUS
Serv.Name
Channel Various channels
available
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
Description
Enter a password up to 63 alphanumeric
characters for authentication when EAP
Type is set to PEAP or EAP-FAST. You
can enter up to 32 alphanumeric
characters in the projector menu. To
enter more than 32 characters, use your
Web browser. After you enter the
password and select Set, the password is
displayed as an asterisk (*).
Imports the client certificate when EAP
Type is set to PEAP-TLS or EAP-TLS.
Set to On to verify the server certificate
when a CA certificate has been set.
Imports the CA certificate.
Enter the server name to verify. You can
enter up to 32 alphanumeric characters.
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
Not available when Wireless LAN Power
is set to Off in the projector's Network
menu.
Set DHCP to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
Setting Options
SSID Display On
Off
IP Address Display On
Off
IPv6 Settings
IPv6
Auto Configuration Set to On to assign addresses
Use Temporary
Address

Network Menu - Wired LAN Menu

Settings on the Wired LAN menu let you select the wired LAN settings.
133
Description
Select whether to display the SSID on the
LAN standby screen.
Select whether to display the IP address
on the LAN standby screen.
Select the IPv6 settings if you want to
connect the projector to the network
using IPv6:
Set to On if you want to connect the
projector to the network using IPv6.
IPv6 is supported to monitor and control
the projector over a network using Epson
Web Control and PJLink.
automatically according to the Router
Advertisement.
Set to On if you want to use a temporary
IPv6 address.