Network Menu - Wired Lan Menu - Epson EH-LS100 User Manual

Projector Network Settings - Network Menu
Setting Options
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
SSID Display On
Off
IP Address Display On
Off
Type of security
When connecting to a wireless network in Advanced connection mode, it is
strongly recommended that you set security.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports TKIP and AES encryption methods.
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.

Network Menu - Wired LAN Menu

Settings on the Wired LAN menu let you select the wired LAN settings.
Description
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 255.255.255.255 or
0.0.0.0 through 254.255.255.255 for
Subnet Mask.
Select whether to display the SSID on the
network standby screen and Home
screen.
Select whether to display the IP address
on the network standby screen and
Home screen.
Network > Network Configuration > Wired LAN
s
Setting Options
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display On
Off
124
Description
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 255.255.255.255 or
0.0.0.0 through 254.255.255.255 for
Subnet Mask.
Select whether to display the IP address
on the network standby screen.