Notes On Transporting; Projector Setup And Installation Options - Epson EV-110 User Manual

Projector Placement
• "Projection Distance" p.21
• "Adjusting the Projection Angle Using the Ball Joint"
• "Image Shape" p.42
• "Projector Setup Settings - Extended Menu"

Notes on Transporting

There are many glass parts and precision components inside the projector. To
prevent damage due to impacts when transporting, handle the projector as
follows.
Attention
• To move it closer, turn off the projector and unplug all of the wires.
• When transporting, as well as the precautions above, prepare the following and
contact your courier:
• Make sure there is no SD card inserted in the projector.
• Tighten the ball joint screw completely to prevent the projector from moving
during transportation.
• Protect the outside of the projector so that it does not receive any impacts
during transportation.
• Place the projector in a sturdy box and indicate on the box that it is a precision
instrument.

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
p.21
p.126
Mounted on a ceiling or lighting track
Mounted on a wall
• Use the Direct Mount (supplied) only when installing on a ceiling or
wall.
a
• If installing on a lighting track, use only the optional Lighting Track
Mount.
• When installing on a ceiling or wall, we recommend a horizontal
ceiling or a vertical wall. See the Installation Guide for details.
19