Brother DCP-330C User Manual page 80

Error Message
No Paper Fed
Out of Memory
Paper Jam
Unable to Change XX
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Wrong USB device
68
Cause
The machine is out of paper or
paper is not properly loaded in
the paper tray.
The paper is jammed in the
machine.
The machine's memory is full.
Paper is jammed in the machine. Remove the Jam Clear Cover (at the back
The machine has a mechanical
problem.
A non-PictBridge compatible or
broken device has been
connected to the PictBridge port.
Action
Do one of the following:
Refill the paper in the paper tray, and
then press Black Start or Color Start.
Remove the paper and load it again
and then press Black Start or
Color Start.
See Printer jam or paper jam on page 70.
Printing operation in progress
Reduce print resolution. (For details, see
®
Printing for Windows or Printing and
®
Faxing for Macintosh in the Software
User's Guide on the CD-ROM.)
of the machine) and pull out the jammed
paper. See Printer jam or paper
jam on page 70.
Disconnect the machine from the power for
several minutes, then reconnect it.
Unplug the device from the PictBridge port,
then press On/Off to turn the machine off
and then on again.