Scan To Card; Entering Scan Mode; How To Scan To Card - Brother DCP-330C User Manual

Scan to Card

Entering Scan mode

When you want to scan to card, press
(Scan).
The LCD shows:
SCAN
Scan to E-mail
Scan to Image
Scan to OCR
Scan to File
Scan to Card
Select & Press
Press a or b to choose Scan to Card.
Press OK.
If you are not connected to your computer
only the Scan to Card selection will appear on
the LCD.
(See Scanning for Windows
in the Software User's Guide for details about
the other menu options.)

How to scan to card

You can scan black & white and color
documents into a media card. Black & white
documents will be stored in PDF (*.PDF) or
TIFF file formats (*.TIF). Color documents
may be stored in PDF (*.PDF) or JPEG
(*.JPG) file formats. The factory setting is
150 dpi Color and the default file format is
PDF. File names default to the current date
that you set using the control panel keys. (For
details, see Quick Setup Guide.) For
example, the fifth image scanned on July 1,
2006 would be named 07010506.PDF. You
can change the color and quality.
5
5
OK
® ®
or Macintosh
5
PhotoCapture Center
Quality
150dpi Color
300dpi Color
600dpi Color
200x100dpi B/W
200dpi B/W
a
Insert a CompactFlash
®
Stick , Memory Stick Pro™,
SecureDigital™, MultiMediaCard™ or
xD-Picture Card™ into your machine.
WARNING
Do not take out the media card while
PhotoCapture is blinking to avoid
damaging the card or data stored on the
card.
b
Load your document.
c
Press (Scan).
d
Press a or b to select Scan to Card,
choose one of the options below:
To change the quality press OK and
go to step e.
To start scanning press Black Start
or Color Start.
e
Press a or b to select the quality,
choose one of the options below:
To change the file type, press OK
and go to step f.
To start scanning press Black Start
or Color Start.
f
Press a or b to select the file type,
press OK.
g
Press Black Start or Color Start.
®
Selectable File
Format
JPEG / PDF
JPEG / PDF
JPEG / PDF
TIFF / PDF
TIFF / PDF
®
, Memory
45
5