Regulations; Outdoor Unit(S) (Cl2) Associated With 50Cj X; Receiving The Equipment; Equipment Identification - Carrier 50CJ Installation, Operation And Maintenance Instructions

12 - REGULATIONS

■ Applicable standards and directives
The unit complies with the following:
DIRECTIVES
- Machinery 2006/42/EC
- EMC 2014/30/EU
- RoHS 2011/65/EU
2009/125/EC (EcoDesign) and regulation (EU) 1253/2014
(1) For dated applicable standards, refer to the declaration of conformity.

13 - OUTDOOR UNIT(S) (CL2) ASSOCIATED WITH 50CJ X

CL2 air-cooled condensation units are outdoor packaged units equipped as standard with:
- Low-noise scroll compressor.
- Air-cooled condenser.
- Axial fan(s) with variable speed control.
These are factory tested and supplied with a nitrogen charge.

14 - RECEIVING THE EQUIPMENT

Check the unit for any damage or missing components upon delivery. Note any damaged or missing parts on the delivery slip.
IMPORTANT: you must notify the carrier of any damage and/or missing parts by registered letter within three days of the
delivery date.

15 - EQUIPMENT IDENTIFICATION

Each unit has a name plate bearing an identification number.
Please state this number in all correspondence.
26
HARMONISED STANDARDS
(1)
EN 60204-1/A1
EN 61000-6-2, EN 61000-6-3/A1
EN 50581
EN ISO 12759
when applicable