ADTRAN TRACER 5045 System Manual page 46

Adtran network device system manual
Hide thumbs Also See for TRACER 5045:
Table of Contents

Advertisement

Section 5 User Interface Guide
>TRACER S
YSTEM
Provides a user-defined alphanumeric description (up to 25 characters) for the TRACER 5045 system.
>TRACER S
YSTEM
Configures the modem control leads on the RS-232 port (terminal interface located on the rear panel of the
unit). Set
M
C
ODEM
ONTROL
adapter). Setting
M
ODEM
enables data to be sent to the VT100 continuously.
VT100 terminal is in use. The TRACER 5045 comes factory programmed with
.
D
ISABLED
Press <Ctrl+Z> three times from the terminal interface to disable
the modem control leads are active.
>TRACER S
YSTEM
Causes the TRACER 5045 to de-assert Clear To Send (CTS) and DSR for a time greater than 20 msec.
This signals the modem to disconnect the analog connection. Hangup-On-DTR-Drop may need to be
explicitly enabled on some modems. If
to close the current session and return to the TRACER System Status menu page and wait for password
input.
>TRACER S
YSTEM
Configures password protection for the VT100 terminal interface. Password protection for the
TRACER 5045 requires password input from the TRACER 5045 System Status menu page when
connecting to the unit. When configured for password protection, the TRACER 5045 closes any terminal
session that remains inactive for more than 10 minutes. The TRACER 5045 comes factory programmed
with
P
E
ASSWORD
NABLE
>TRACER S
YSTEM
Sets the password for password protection of the TRACER 5045 VT100 terminal interface. Enter up to 8
alphanumeric characters. The system password is case sensitive.
The default password for the TRACER 5045 is tracer.
>TRACER S
YSTEM
Resets all system error counters for the TRACER 5045.
46
C
> S
ONFIGURATION
C
> M
ONFIGURATION
to
when connecting the unit to a modem (using a null modem
E
NABLED
to
C
D
ONTROL
ISABLED
C
> M
ONFIGURATION
P
ASSWORD
C
> P
ONFIGURATION
set to
.
D
ISABLED
C
> P
ONFIGURATION
C
> P
ONFIGURATION
© 2003 ADTRAN, Inc.
N
ITE
AME
C
ODEM
ONTROL
prevents the TRACER 5045 from monitoring DCD and
must be set to
M
C
ODEM
ONTROL
C
ODEM
ONNECTION
is
P
E
ROTECTION
NABLED
E
ASSWORD
NABLE
ASSWORD
S
ERFORMANCE
TATS
TRACER 5045 System Manual
when the
D
ISABLED
M
C
ODEM
ONTROL
M
C
ODEM
ONTROL
(L
)
OGOUT
, this menu also causes the unit
(C
)
LEAR
612805045L1-1A
set to
when

Advertisement

Table of Contents
loading

Table of Contents