ADTRAN TRACER 5045 System Manual page 43

TRACER 5045 System Manual
C. RF Status
A graphical indicator of the TRACER RF links is located beneath the Technical Support contact
number. The status of the received radio link is indicated as
This RF status display corresponds to the
D. Ethernet Status
A visual status of the current configuration for each 10/100BaseT/TX ethernet interface (for both the
local and remote TRACER systems) is provided on the TRACER 5045 System Status menu page. The
current operational speed of each ethernet interface (
10BaseT or 100BaseTX. A blank line next to the port number indicates there is no active ethernet link
on the interface. A separate ethernet status page is accessible from the main menu to provide detailed
ethernet information.
E. Remote TRACER Status
The right portion of the TRACER 5045 System Status menu page reports the status of the remote
TRACER 5045 (the system across the wireless link from the active terminal). If the RF link is down,
D N A
ATA OT VAILABLE
F. Local TRACER Status
The left portion of the TRACER 5045 System Status menu page reports the status of the local
TRACER 5045 (the system where the active terminal is attached).
G. Frequency Plan
Displays the frequency plan (A or B) for the TRACER 5045 unit. For an operational TRACER 5045
system you should have one A and one B frequency plan.
H. Rx Quality
Displays an indicator of receive signal quality that is not necessarily related to receive signal level (for
both the local and remote units) using a series of symbols (
the signal quality. This indicator is related to signal-to-noise ratio and features a colon (:) marker to
-6
indicate 10 bit error rate. This indicator is useful as a diagnostic tool to help identify interference, as
the system may have high receive signal level and poor signal quality in situations where interference
is an issue.
I. Rx Power
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols
( ). The more symbols (
#
unavailable,
D N
ATA
J. Tx Power
Displays the approximate transmitter levels (for both the local and remote units) using a series of
symbols ( ). The more symbols (
#
end data is unavailable,
K. Navigation Reminders
Displays system navigation reminders. For more details on system navigation, refer to Navigating the
Terminal Menu on page 40.
612805045L1-1A
RF DOWN
is displayed in place of the remote system status information.
) displayed, the stronger the signal. If the link is down and remote end data is
#
is displayed in place of the symbols (
A
OT VAILABLE
) displayed, the stronger the signal. If the link is down and remote
#
D N A
ATA OT VAILABLE
© 2003 ADTRAN, Inc.
or
RF U
P
LED on the front of the unit.
or ) indicates whether the interface is
10BT 100BT
). The more symbols displayed, the better
#
is displayed in place of the symbols (
Section 5 User Interface Guide
for each direction.
RF D
OWN
).
#
).
#
43