The Multi-Purpose Tray (Mp Tray) (For Mfc-8840D And Dcp-8045D) - Brother MFC-8440 Software User's Manual
Brother all in one printer - all-in-one printer user manual
Hide thumbs
Also See for MFC-8440:
- User manual (426 pages) ,
- Service manual (367 pages) ,
- Software user's manual (178 pages)
Table of Contents
Advertisement
The multi-purpose tray (MP tray) (For MFC-8840D and
DCP-8045D)
1
Select the Paper Size, Media Type, Paper Source, and other
settings in the printer driver.
Media Type: Thick paper or Thicker paper
Paper Source: MP Tray
2
Open the back output tray, and then pull out the face-up output
tray support if necessary.
3
Open the MP tray and lower it gently.
4
Pull out the MP tray support flap.
5
When putting paper in the MP tray, make sure it touches the
back of the tray.
Make sure that the paper is straight and in the proper position in
the MP tray. If it is not, the paper may not be fed properly,
resulting in a skewed printout or a paper jam.
USING THE MACHINE AS A PRINTER 1 - 10
Advertisement
Table of Contents
