Brother MFC-8440 Software User's Manual page 33
Brother all in one printer - all-in-one printer user manual
Hide thumbs
Also See for MFC-8440:
- User manual (426 pages) ,
- Service manual (367 pages) ,
- Software user's manual (178 pages)
Table of Contents
Advertisement
Use Duplex Unit (For MFC-8840D and DCP-8045D)
Check the Duplex box and then select Use Duplex Unit. In this
mode the machine prints on both sides of the paper automatically.
Manual Duplex
Check the Duplex box and then select Manual Duplex. In this mode,
the machine prints all the even numbered pages first. Then the
printer driver stops and shows the instructions required to re-install
the paper. When you click OK the odd numbered pages are printed.
Duplex Type
You can select Duplex Type. There are six types of duplex
directions available for each orientation.
Flip on Left Edge
Flip on Right Edge
Flip on Top Edge
Flip on Bottom Edge
Flip on Top Edge (No Reverse)
Flip on Bottom Edge (No Reverse)
Binding Offset
Check the Binding Offset option, you can specify the offset value of
the binding side in inches or millimeters (0 - 8 inches) [0 - 203.2 mm].
PRINTER DRIVER SETTINGS 2 - 7
Advertisement
Table of Contents
