Changing The Temporary Copy Settings; Enlarging Or Reducing The Image Copied - Brother MFC-7420 User Manual

Chapter 8
Changing the
temporary copy
settings
Enlarging or reducing the
image copied
You can select the following enlargement or
reduction ratios.
Auto sets the MFC to calculate the reduction
ratio that best fits the size of paper.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Press
100%
Enlarge/Reduce
104% EXE→ LTR
141% A5→ A4
200%
Auto
Custom(25-400%)
50%
70% A4→ A5
78% LGL→ LTR
83% LGL→ A4
85% LTR→ EXE
91% Full Page
94% A4→ LTR
97% LTR→ A4
1
Press (Copy) to illuminate it in
green.
2
Load your document.
3
Press Enlarge/Reduce.
8 - 3
4
Press ▲ or ▼ to select the enlargement
or reduction ratio you want.
Press Menu/Set.
—OR—
Use the dial pad to enter an
enlargement or reduction ratio from 25%
to 400% .
Press Menu/Set.
(For example, press 5 3 to enter 53% .)
5
Press Start.
—OR—
Press other temporary copy keys for
more settings.
Note
■
The Auto setting is available only when
loading from the ADF.
■
Special Copy Options 2 in 1(P) ,
2 in 1(L) , 4 in 1(P) , 4 in 1(L) or
Poster(3 x 3) are not available with
Enlarge/Reduce.
■
(P) means Portrait and (L) means
Landscape.
■
After you choose your settings by pressing
Menu/Set, the LCD shows Set
temporarily .