Setup Send; How To Enter Fax Mode; How To Dial; Manual Dialing - Brother MFC-7420 User Manual

3

Setup Send

How to enter Fax mode

Before sending faxes or changing fax send or
receiving settings, make sure
illuminated in green. If it is not, press
(Fax) to enter Fax mode. The default setting
is Fax mode.

How to dial

You can dial in any of the following ways.

Manual dialing

Press all of the digits of the phone or fax
number.

One-Touch Dialing

Press the One-Touch key of the location you
want to call. (See Storing One-Touch
(Fax) is
numbers on page 5-1.)
Note
To dial One-Touch numbers 5 to 8, hold down
Shift as you press the One-Touch key.

Speed-Dialing

Press Search/Speed Dial, #, and then the
three digit Speed-Dial number. (See Storing
Speed-Dial numbers on page 5-2.)
Note
If the LCD shows Not Registered when
you enter the One-Touch or Speed-Dial
number, a number has not been stored at this
location.
Three-digit number
3
3 - 1