Custom Settings - Brother MFC-590 Owner's Manual

Custom Settings

Volume Settings
Ring Volume
You can select how loud, the machine rings for incoming calls. The ring volume can be turned off
for silent reception if required.
1
Press Menu/Set, 1, 4, 1.
2
Press or to select OFF, LOW or HIGH.
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
You can adjust the ring volume when the machine is idle. You can turn the ring OFF.
Press or to adjust the volume level. With each key press, the machine rings so you can hear
the current setting and the display shows the setting you are choosing. Each key press changes the
volume to the next setting.
The new setting will remain until you change it again.
Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes set to LOW. When the beeper
is set to LOW or HIGH, the machine beeps every time you press a key or make an error, and at the
end of sending or receiving a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Menu/Set.
4
Press Stop/Exit.
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public Switched Telephone Network) lines.
However, many offices use a central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The recall facility on the machine
supports timed break recall only (TBR), PBXS normally can work with this for gaining access to an
outside line, or for transferring a call to another extension: The feature works when the Tel/R key is
pressed.
19
Setup