Setting The Station Id - Brother MFC-590 Owner's Manual

Setting the Station ID

You can store your name and fax number to be printed on all fax pages that you send.
It is important that you enter the fax number in the internationally standardized format, i.e. in
accordance with the following strict sequence:
- The "+" (plus) character (press
- Your Country Code (e.g. "44" for the United Kingdom, "41" for Switzerland)
- Your local area code minus any leading "0" ("9" in Spain)
- A space
- Your number on the local exchange, using spaces to aid readability as appropriate.
As an example, the machine is installed in the United Kingdom and your national telephone number
is 0161-444 5555, then you must set the fax number of your station ID as: +44 161-444 5555.
1
Press Menu/Set, 1, 3.
2
Enter your fax number (up to 20 digits) and press Menu/Set.
3
Enter your name (up to 20 characters) using the dial pad and the chart. To enter a space press
twice.
4
Press Menu/Set.
5
Press Stop/Exit.
I When you enter your name, see Entering Text, page 146.
I If you do not enter a fax number, no additional information can be entered.
I To enter a space, press
characters.
I If your Station ID has already been programmed, the screen prompts "1" to
make a change, or "2" to exit without changing.
18
Chapter 1
key)
once between numbers and twice between