Setting the Phone Line Type
If you are connecting the MFC to a line that features a PABX (PBX)
or ADSL to send and receive faxes, it is also necessary to change
the Phone Line Type accordingly by completing the following steps.
1
Menu/Set
Press
2
Press
or
▲
only), ADSL (or Normal ).
Menu/Set
Press
3
Stop/Exit
Press
PABX and TRANSFER
The MFC is initially set to be connected with PSTN (Public Switched
Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX).
Your MFC can be connected to most types of PABX. The MFC's
recall feature supports timed break recall only (TBR). TBR will work
with most PABX systems allowing you to gain access to an outside
line, or transfer calls to another extension. The feature works when
Hook
the
key is pressed.
You can program a
in a Speed-Dial location. When programming the Speed-Dial
Menu/Set 2
number (
displays "!"), then enter the telephone number. If you do this,
you do not need to press
a Speed-Dial location. (See Storing numbers for easy dialling on
page 5-1.)
2 - 3 GETTING STARTED
0
5
,
,
.
to select PBX (For Australia and New Zealand
▼
.
.
Hook
keypress as part of a number stored
3
1
-
-
) press
Hook
Hook
first (the screen
each time before you dial using