Connecting The Phone Line; Connecting The Power Cord - Brother MFC-440CN Quick Setup Manual

STEP1
Setting Up the Machine
4

Connecting the phone line

1
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
6
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.
5
1
1
2
• The machine must be fitted with an earthed plug.
• Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Set the receive mode to 'External TAD' for
MFC-440CN, or 'Manual' for MFC-660CN, if
you have an external answering machine.
For details, see Connecting an external TAD
(telephone answering device) in Chapter 7 of
the User's Guide.

Connecting the power cord

Connect the power cord.
Warning