Install The Power Cord And Phone Line - Brother FAX-2820 Quick Setup Manual

Install the Power Cord
5
and Phone Line
1
Plug the AC power cord into an AC outlet.
Turn the power switch on.
2
Connect one end of the telephone line cord
to the jack on the machine marked LINE
and the other end to a modular wall jack.
Warning
■ The machine must be grounded using a 3-prong
plug.
■ Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see "Connecting an
external telephone answering device
(TAD)" in the Appendix of the User's
Guide.
TAD
TAD
7