Prepare The Site - Kohler Memoirs K-8333T-0 Installation And Care Manual

Finished Floor

1. Prepare the Site

NOTICE: Provide adequate floor support.
NOTICE: Measure your product for site preparation.
Determine the location of the bath.
IMPORTANT! To ensure a successful installation, install the bath on a level finished floor.
Position and install a standard PVC or brass drain pipe. Install the drain pipe so it extends above the finished
floor - " X" dimension. Refer to the product specification sheet for the " X" dimension.
2. Install the Drain
CAUTION: Risk of personal injury. This bath is extremely heavy. Obtain sufficient help and use lifting
straps to carefully lift or move the bath.
Place a drop cloth on the floor.
With help, use lifting straps to carefully place the bath on its side.
NOTE: The gaskets are included in a small box located within the bath carton.
Apply silicone sealant to both sides of the flange gasket and drain gasket to act as a lubricant.
Apply sealant tape to the drain flange threads.
Install the flange gasket, drain flange, drain gasket to the bath. Secure the drain flange using nut.
Drain Flange
Flange Gasket
Drain Gasket
Nut
Drain Pipe
Apply silcone
sealant to both sides.
Apply silcone
sealant to both sides.
3
X
1329949-T01-A