Brother DCP-8020 Quick Setup Manual page 40

L
Click Next.
See the For Administrator section of this
guide or the NC-9100h User's Guide located
on the CD-ROM for more network
configuration information.
M
®
Windows 95/NT Users
®
Windows 98/Me/2000/XP Users:
Select yes and then click Next.
N
Click Next or enter the name you want
displayed on the LCD for your PC and then
click Next.
The default name is the name of your PC.
You can avoid receiving unwanted
documents by setting a 4-digit PIN Number.
®
For Windows 98/Me/2000/XP Users
Only
Please wait for the window to open.
O
O
Go to
P
Click Finish restart your computer.
®
Windows 95/98/98SE/Me/NT/2000 Users
P
follow step .
The Network Scanning feature is not
®
supported in Windows
®
For Windows XP Users Only
The Brother Printer and Scanner
drivers have been installed and the
installation is now complete.
After the computer restarts, click Yes to
have the Control Center load each time
®
Windows is started. The Control Center
will appear as an icon in the task tray.
If you click No the Scan keys on the DCP
will be disabled.
Even if you select NO, later you will be able
to launch the Brother Control Center to use
the Scan key by double clicking the Smart UI
icon on the desktop. This loads the Brother
Control Center to the task tray. See
AutoLoad the Brother Control Center,
Chapter 15 in the Documentation (User's
Guide) located on the CD-ROM.
®
For Windows 98/Me/2000 Users
The Brother Printer and Scanner
drivers have been installed and the
installation is now complete.
®
For Windows 95/NT Users
The Brother Printer driver has been
installed and the installation is now
complete.
95 or NT.
37