For Windows Xp Users Only - Brother DCP-8020 Quick Setup Manual

Step 2
For Parallel Interface Cable Users
(For Windows
For Windows
Make sure that you followed the instructions in
G
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the DCP.
Turn on the DCP by plugging in the power
cord. Turn the power switch on.
.
The installation of the Brother drivers will
automatically start. The screens appear one
after another, please wait for a while.
28
Installing the Driver & Software
®
95/98/98SE/Me/2000 Professional/XP)
®
XP Users Only
1 F
to on pages 20 - 22.
H
The README.WRI file will be displayed.
Please read this file for troubleshooting
information and then close the file to
continue installation.
I
When the following screen appears, click
Finish and wait as the PC restarts Windows
and continues the installation.
A Basic Universal printer driver was
installed with the MFL-PRO Software
Suite which is certified for use with
®
Windows operating systems.
Brother also offers a full featured
printer driver (Native driver) that
includes more features than the Basic
Universal driver. However, this driver
does not include a Windows
certificate. To install the Brother Native
driver proceed to step
For details on what features are available
see chapter 7 of the User's Guide.
®
J
.