Brother DCP-8020 Quick Setup Manual page 21

Step 2
For USB Interface Cable Users
(For Windows
Brother Native driver Installation
J
Click Start and select Printers and Faxes.
Click on Add a printer and the Add Printer
Wizard will start.
When this screen appears, click Next.
K
Un-check the Automatically detect and
install my Plug and Play printer selection
and then click Next.
L
Select USBXXX from the pull down window
for the Printer Port Selection and then click
Next.
18
Installing the Driver & Software
®
98/98SE/Me/2000 Professional/XP)
M
Click on Have Disk.
N
Browse the CD-ROM and highlight your
language folder and click Open. Highlight
the WXP folder and click Open. Highlight
the Addprt folder and click Open.
O
Click Open.
P
Make sure X:\ENG\WXP\Addprt is
displayed in the window and click OK (X:\ is
the drive letter of your CD-ROM).