Brother DCP-8020 Quick Setup Manual page 32

Brother Native driver Installation
J
Click Start and select Printers and Faxes.
Click on Add a printer and the Add Printer
Wizard will start.
When this screen appears, click Next.
K
Un-check the Automatically detect and
install my Plug and Play printer selection
and then click Next.
L
Select BMFC (Brother MFL Port) from the
pull down window for the Printer Port
Selection and then click Next.
M
Click on Have Disk.
N
Browse the CD-ROM and highlight your
language folder and click Open. Highlight
the WXP folder and click Open. Highlight
the Addprt folder and click Open.
O
Click Open.
P
Make sure X:\ENG\WXP\Addprt is
displayed in the window and click OK (X:\ is
the drive letter of your CD-ROM).
Continued ...
29